No Era by Areon Flutes

IMG_0104.JPG

No Era by Areon Flutes is released today via innova Recordings! This is the 4th release from Areon and my first as a member of Areon Flutes. It features three works written for the group by San Francisco Bay Area composers Sahba Aminikia, Ryan Brown, and Danny Clay.  I hope you enjoy listening to it as much as I do!

Listen to No Era on iTunes, Spotify, Amazon, and on the innova website

 

Pheromone comes out on Friday the 13th!

My 3rd solo CD, Pheromone, will be released on November 13th.

If you're in the NYC area: I'm playing all the pieces on the album at Scholes Street Studio in Brooklyn on Sunday, November 1st. Link to Facebook event page.

If you're in Wichita, KS: I'm playing 4 of the 6 pieces from the album at the KNOB Festival on Saturday, November 7th. Link to event.

If you're in the San Francisco area: To celebrate, I'll be bringing some baked vegan goodies to the New Music Open Mic at the Center for New Music on SUNDAY, November 15th. I will also be performing one piece from the album at the Open Mic. Link to event.

Everywhere else: You can buy my album! CDs and digital downloads will soon be available everywhere on November 13th. In the meantime, you can pre-order the CD or digital downloads from Bandcamp. iTunes and Amazon both have downloads available for pre-sale too.

Working hard!

I've been busy with a couple huge projects lately. One of them, I will share with you in a month or two. The other is: my 3rd album! I just finished recording it and it will be mastered next week. I am hoping for a November release. 

I recorded Eli Fieldsteel's  Fractus III: Aerophoneme  with my Sankyo Kingma system flute. Even though the piece doesn't require a Kingma system flute, it was nice to use it because of the many quarter tone passages in the piece. 

I recorded Eli Fieldsteel's Fractus III: Aerophoneme with my Sankyo Kingma system flute. Even though the piece doesn't require a Kingma system flute, it was nice to use it because of the many quarter tone passages in the piece. 

The album will contain the following works:

Fractus III: Aerophoneme for flute and live electronic sound by Eli Fieldsteel
Huge Blank Canvas Neck Tattoo for alto flute and digital delay by Gregory C. Brown
Pencilled Wings for flute, piano, and stereo playback by Emma O'Halloran
60.8% for bass flute and electronics by Douglas Laustsen
Pheromone for flute(s), piano, and electronics by Isaac Schankler
Etude for contrabass flute and TI83+ calculator by Matthew Joseph Payne

I can't wait to share this album with you! I've been working very hard and am really proud of it. 

How much does it cost to make a CD?

This is a common question I get from classical musicians. I'm going to do my best to answer it in a way that it's most practical and useful for the classical musician who is serious about producing their own CD. Here's my advice based on my experience.

THE EASY STUFF FIRST

Physical copies of CDs don't seem to change in price. It's about $1000 to manufacture 1000 replicated CDs in a jewel case with a one double-sided page insert. If you want fancier packaging, it can get really expensive but there are many options these days so it helps to do your research! Read more about CD manufacturing, the difference between replication and duplication on the internet. A company I like to use for CD replication is Oasis. The Oasis website is a great place to start to read about the  manufacturing process. Shipping costs from the manufacturer to you may not be trivial. The $1000 number is a good placeholder for ball-parking budgets.

Distribution. If you're going to self-release an album, I recommend going with CD Baby for world-wide physical and digital distribution. They charge a one-time fee per album. You should use the barcode they can assign your album (extra $20, totally worth it). You should also put your album on Bandcamp. (Read up on ISRC codes. You're going to want to use the ones CD Baby assigns for digital distribution on Bandcamp too.) For most classical musicians (performers and composers) the Standard distribution package (currently $59) is what you want (plus the barcode) at CD Baby

OTHER COSTS

Recording, editing, mixing, and mastering costs can vary widely depending on your project.

You need to answer the following in order to estimate your costs. Some questions will lead to more questions as you answer them:

  1. What am I recording? 
  2. How long will each piece take to record?
  3. How long will each piece take to edit and mix?
  4. How much do I need to pay my collaborators?
  5. Is it best to record this in a hall or church or is it better to record in a studio?
  6. How much is the hourly or day rate for the engineer and/or studio?
  7. How much does it cost to rent the perfect hall or church?
  8. Am I going to produce this all by myself or do I need a close colleague or teacher to help me record my best performances at the studio/hall on the day of recording? 

The only way to answer #2 and 3 is to try recording and mixing something. It's a good chance to try a new recording studio or engineer or space. You might be a genius that gets the perfect take every time, the first time, and maybe you never need to edit anything. You might be a perfectionist that needs to record the same thing 20 times and then listen to the takes obsessively over several days before deciding to completely record it again. So a lot of the recording costs depend on you. If you hire the best collaborative pianist in your area, your sessions will go quickly. If you don't hire professional collaborators to record with you, you will waste a lot of time and money on recording/editing/mixing. If it's going to be an entire CD of solo piano music recorded in one location with the same engineer, your mixing process will be pretty quick. If you have mixed percussion or if the instruments are recorded separately, not all at once and in the same room, it's going to take longer to mix. In general, the more instruments, microphones, locations used, the longer it will take to mix. After your experience with recording/editing/mixing one piece, you will have more information to estimate the recording costs for the rest of your album. 

How do you choose a good recording studio or engineer? The best method is to ask around of course. If you're new in town or just don't know anyone, I say evaluate the studio based on the staff. You want someone who is smart, organized, and not lazy to be your engineer. If an engineer seems bothered when they have to get up to add another microphone, Get. Out. ASAP. 

I tried out three local recording studios before I went to Fantasy Studios in Berkeley, CA. Fantasy Studios and all three engineers that work there - I've worked with all three - are the absolute best. (I can go on and on about how great they are but this blog post is not all about them so... Just take my word for it.)

Mastering. Find out who mastered the CDs you like that use the same instruments or style that you will have on your CD. Ask your recording engineer for recommendations too. If your recording/mixing engineer did a great job on mixing AND if the style and instrumentation of the entire CD are similar, the mastering process will not take more than a day in the hands of an experienced mastering engineer. A mastering engineer should be able to give you their hourly rate and an estimate on how many hours your CD will take to master based on length of the entire CD, number of tracks, style and instrumentation. 

Mechanical Licenses. If you composed/published all the music you're recording on the CD, you can skip this paragraph. For everyone else, you need to pay for the Mechanical License to the publisher of the music you are recording unless it's in the public domain or if you are recording a piece for the first time and you have negotiated an alternate arrangement/rate with the composer/publisher. The Harry Fox Agency is the main company that administers these licenses online. If you know the composers or have a direct relationship with the publisher you can ask if you can pay them the license fees directly. In this case you save some money that you don't have to pay Harry Fox. This will require really good record keeping on your end. 

After all this: there's more. Promotion. Getting your CDs reviewed. Etc. These are promotional costs you should consider since it makes no sense to make a great CD that no one gets to hear because they just don't know you recorded and released it. (Maybe I can get a guest blogger to address this! *hint* *hint* Any takers??)

DO MORE RESEARCH

Most of the information I've found on the internet are geared towards indie bands and singer/song-writer types but all those industry how-to's and articles are totally worth reading. Read everything you can. It's all out on the internet for free! Some of my favorite resources for recording or indie-music-ness:


Do you still have specific questions? 

I am available for consultation on certain topics. If I don't know the answer, I'll try to refer you elsewhere. 


Was this article helpful to you? If so, please consider leaving a tip: 

Adopt a Composer! and help me make my next CD

UPDATE Dec 22, 2014: Thank you to everyone who helped me get to 115% of my original goal!! Although we didn't get to $4000, I'm still looking into finding an excellent illustrator willing to make the album art. Stay tuned! And thank you again! 

UPDATE Dec 5, 2014: Thank you to the 100 most good looking and intelligent people who backed my project! We are over the initial goal of $3000! AND we have 11 more days to go! So if you haven't backed the project, there's still time! I also have a stretch goal: If I can raise $1000 more, I can hire a real graphic designer to design the cover, instead of doing it myself. Thank you again from the bottom of my heart. XOXO!

I am raising funds to pay the composers who wrote the pieces on my next album. The six composers (Gregory C. BrownEli FieldsteelDouglas LaustsenEmma O'HalloranIsaac Schankler, and Tina Tallon) have collaborated with me to come up with some excellent rewards for those who contribute.

You can be a part of this next album for just a $2 pledge:

Get your name on the cover of my next album! Any pledge over $2 = your name in the CD cover art!

Read more about my Kickstarter project and make a pledge.

As you may already know, Kickstarter projects will only get funded if the project meets its goal. In this case, my goal is to raise $3000 by December 16th. 

If you can give $2, please do so. If you can give more, you can get some really fun rewards. I would appreciate your involvement in the making of my next album. Thank you for your consideration. If you cannot make a pledge I would really appreciate it if you could share my Kickstarter project with your friends. The link: http://kck.st/1uq5nJ0


This fundraiser will cover a part of the commissioning fees and mechanical licenses that I will pay directly to the composers.

Input-Output is my third solo album project. It will include these newly written works:

  • Pheromone for flute, piano, and electronics (2014) by Isaac Schankler*

  • Pencilled Wings for flute, piano, and stereo playback (2014) by Emma O'Halloran*

  • Fractus III: Aerophoneme for flute and quadraphonic electronic sound (2011/2012) by Eli Fieldsteel

  • New work for flute and electronics (2014) by Douglas Laustsen*

  • Huge White Canvas [working title] for flute and elecronics (2014) by Gregory C. Brown*

  • New work for piccolo and live electronics (2014) by Tina Tallon*

*commissioned for this record

Pianist Jacob Abela and I already premiered and recorded the O'Halloran and Schankler in July 2014. Videos of the premieres:

Between February and June 2015, I will perform and record the other 4 pieces.  

I expect to complete the mastering process for Input-Output in June 2015 and release the album in the Fall of 2015.

WHY ADOPT?

"Sponsor a composer" just didn't sound as good. :)